Everything You Need

Fischer’s labor rate is updated as the market changes and we can via email or phone quote you our latest rates.  The majority of our jobs will be completed on a time and materials basis.  This means we will give you an estimate of costs up front based on our expert assessment and consultation about the scope of the project, and then at the end of the job we will bill you based on the actual labor and materials incurred.

This depends on the nature of the project.  For certain small jobs, we can provide a remote estimate through a quick phone call or some pictures or measurements from the homeowner.  With larger and more complex jobs, a site visit will often be necessary.  In that case we generally will be onsite briefly to inspect the situation and then within 24 hours, on average, we will get an estimate returned to you electronically.  If permitting is required for your project, Fischer will outline what is required and help with the process.  This will be addressed in the estimating process.

The best approach if you think you might need an upgrade is to call an electrician to have an assessment.  If you notice visibly worn or fraying wiring, you will need a new panel.  If you need to add circuits into your home, you may need an upgrade.  If your panel is not up to compliance with current building code and safety regulations you should consult with your electrician about an upgrade.  Fuses are commonly used in older homes electrical panels but these are not considered a fire hazard, if you have these you should call an electrician to upgrade you to modern circuit breakers.  If you are planning to install newer electrical equipment in your home, for example, air conditioning, a hot tub, or a new refrigerator, you may need to upgrade your electrical panel to ensure compatibility with the new equipment.

This depends on the nature of the work.  Fischer electricians are trained in a least invasive approach method and they will endeavor to avoid putting holes in your wall unless absolutely necessary to complete the electrical work.  The need to put holes in the wall depends on many factors including the layout of your home and what access points you have (attic, crawl space, basement, and other).  In the case of a complete re-wire, we will start by doing a detailed walk-through and coming up with a plan for the project and identifying all access points.  We will identify in advance if the need for any wall holes exists.  In the event that we do need to put holes in the wall, Fischer also has a repair team on staff that can come out and fix any damage.  Fischer’s team will patch any holes in the wall and also complete any re-painting necessary.  Upon completion of the project your walls will be like Fischer was never there.

When in doubt, you likely will need a permit.  Fischer can help with the permitting process if it is needed and can tell you in a site visit if permitting will be required for your project.  If a permit is required, Fischer will work with you to schedule an onsite inspection as part of the permit process.  An inspector will then need to come on site to review the work and certify it.

Depending on the nature of your project, it is likely that you do not need to be home in order for our electrician to complete your project.  As long as we can clearly align on the scope of work – through Fischer’s detailed estimating process, picture, phone, video communication – and we have access to the home; Fischer can be out working in your home during the day and update you as the project progresses.  For a multi-day project, it is common that we put lockboxes with a key near the door and our electricians can enter securely while you are at work.